Instrumentation Monthly Test | Measurement | Control
Status Instruments has used state of the art technology to develop a powerful but cost effective ‘smart’ powered conditioner with features usually only found in more expensive conditioners.
Suitable for frequency or pulse generating sensors, meaning it is ideal for use with flow meters or pulse counting applications, the SEM 1600F has an advanced mode were maths functions can be applied. This allows differential flow or pulse counts to be compared. For example, flow measured going into a process minus flow measured on the output of a process allows the product to calculate the consumption of the process. With an integral totalise function, when the consumption reaches a programmed total or increment, the product can be programmed to trip/pulse a relay contact. K factor and M factors can also be applied via the software, allowing the SEM1600F to be calibrated specifically to the flow sensor used.
The output stage offers either voltage, bipolar voltage or active/passive current re-transmission signals. The retransmission signal can be ranged to a scale anywhere within the process range. The product comes with an AC/DC power supply that will operate in the range (10 to 40) VDC and (10 to 32) VAC.
For more information visit www.status.co.uk