Portable Compressed Air Quality Analysis Now With Particle Measurement Down to 0.1µm

SUTO iTEC GmbH have recently announced that their S600 portable compressed air purity analyser has been upgraded with a new particle sensor to provide particle measurement fully in line with the requirements of ISO 8573-1.

The S600 was already a highly successful unit but the lower particle limit of 0.3µm was a problem for those that wanted to measure strictly to the ISO 8573 limits. The new sensor design removes these issues and is also available in the new S132 standalone particle counter and S601 wall mounted continuous air purity analyser. In addition to particles, the S600 measures dew point down to -100°C, pressure and oil vapour in order to produce its pdf reports.

www.measuremonitorcontrol.com

sales@measuremonitorcontrol.com

Check Also

Automotive Testing Webinars from OxTS

Oxford Technical Solutions – the go-to provider of inertial navigation solutions for automotive engineers – …

Area Isolation in Cabinets Without Climate Control in Zone 2 Locations

Many process facilities need 4-20mA signals from field transmitters and analyzers to be shared with …